Handheld Laser Welding · Water-Cooled

RUVEN WX15

1500W Water-Cooled Handheld Laser Welding Machine

Water-cooled 1500W handheld fiber laser welding with wire feeder for sheet-metal fabrication.

  • 1500W fiber laser – Max, Raycus or BWT source
  • Water-cooled with Hanli SCH-1500 chiller
  • 10m fiber cable, wire feeder included as standard
  • Process reference for stainless, carbon, galvanized steel and aluminium
RUVEN WX15 1500W water-cooled handheld laser welding machine with wire feeder

Appearance for reference – details of the delivered machine may differ.

01

Product Overview

The RUVEN WX15 is a 1500W handheld fiber laser welding machine with water cooling. The cabinet system combines the fiber laser source, a Hanli SCH-1500 water chiller, the laser control system, a wire feeder and the handheld welding head, connected by a 10m fiber cable.

Laser welding concentrates energy in a small spot, so heat input and the heat-affected zone are typically small. This helps limit distortion on sheet metal, gives clean seams and can reduce grinding after welding.

Handheld welding head, control system and wire feeder are supplied as one matched set as standard. Laser source brand, accessories, delivery terms and documentation are confirmed in writing in your quotation.

General characteristics of handheld fiber laser welding are described for orientation. Results on your parts depend on material, joint design and parameters.

02

Key Features

  • 1500W fiber laser source – configurable

    Max, Raycus or BWT fiber laser source; modulation frequency 1–5000Hz, power stability ±2%.

  • Water cooling with chiller

    A separate Hanli SCH-1500 water chiller keeps the laser source and the welding head at a stable temperature.

  • Welding head, control system and wire feeder as one set

    Handheld welding head, laser control system and wire feeder are supplied together as a matched set (standard).

  • 10m fiber cable

    Long reach around large workpieces; longer cables on request.

  • Process reference included

    Reference settings for stainless, carbon and galvanized steel and aluminium – verify by sample testing.

03

Technical Specifications

Data from the WX15 configuration and technical sheet. Further details are confirmed in your quotation.

Product brochure

The WX15 brochure is in preparation and can be sent on request once available.

Technical Specifications – RUVEN WX15
ParameterValueRemark
Laser power 1500W
Cooling system Water-cooled
Input voltage 220V
Fiber cable length 10m Longer cable on request – cost and lead time confirmed in the quotation
Fiber laser source Max / Raycus / BWT (configurable) MFSC-1500 / RFL-C1500 / BFL-CW1500
Water chiller Hanli SCH-1500
Power consumption – chiller 1.7kW
Total power consumption 7kW Complete machine
Machine weight ≈ 200kg (±20kg) Approx.: laser source 50kg + chiller 60kg + other components – to be confirmed
Welding system Handheld welding head + control system + wire feeder (one set, standard)

Process reference

Reference settings for flat-position welding with filler wire and argon shielding. For guidance only – verify by sample testing on your parts.

Laser welding process reference – material thickness, power and speed
MaterialGasThickness (mm)Laser power (W)Wire Ø (mm)Wire feed (mm/s)Scan speed (mm/s)Scan width (mm)Frequency (Hz)Duty cycle (%)Gas pressure (bar)
Stainless steel Ar 1 1000 1.0 90 300 2.5 1000 100 10
Stainless steel Ar 1.5 1000 1.0 90 300 2.5 1000 100 10
Stainless steel Ar 2 1500 1.2 75 300 3.0 1000 100 10
Stainless steel Ar 2.5 2000 1.2 75 300 3.0 1000 100 10
Stainless steel Ar 3 2000 1.6 60 300 3.5 1000 100 10
Carbon steel Ar 1 1000 1.0 90 300 2.5 1000 100 10
Carbon steel Ar 1.5 1000 1.0 90 300 2.5 1000 100 10
Carbon steel Ar 2 1500 1.2 75 300 3.0 1000 100 10
Carbon steel Ar 2.5 2000 1.2 75 300 3.0 1000 100 10
Carbon steel Ar 3 2000 1.6 60 300 3.5 1000 100 10
Galvanized steel Ar 1 1000 1.0 90 300 2.5 1000 100 10
Galvanized steel Ar 1.5 1500 1.0 90 300 2.5 1000 100 10
Galvanized steel Ar 2 2000 1.2 75 300 2.5 1000 100 10
Galvanized steel Ar 2.5 2000 1.6 60 300 3.0 1000 100 10
Aluminium Ar 1 1000 1.0 90 300 2.5 1000 100 10
Aluminium Ar 1.5 1500 1.0 90 300 2.5 1000 100 10
Aluminium Ar 2 2000 1.2 75 300 2.5 1000 100 10
Aluminium Ar 2.5 2000 1.6 60 300 3.0 1000 100 10

Highlighted: settings at 1500W (this model). Greyed: requires more laser power than the WX15.

  • Reference penetration on stainless, carbon and galvanized steel: 1000W ≈ 1mm · 1500W ≈ 1.5–2mm · 2000W ≈ 2.5–3mm.
  • Aluminium: 1500W ≈ 1mm · 2000W ≈ 2mm; 1500W or more is usually selected. Aluminium wire needs a graphite wire-feed tube and a U-type 1.2 wire-feed wheel – please mention it when ordering.
  • Copper: please send samples for test welding or consult our team before ordering.

Process reference for guidance only – verify by sample testing.

04

Product Details

Main components of the WX15: fiber laser source (Max / Raycus / BWT, configurable), water chiller, and handheld welding head with control system and wire feeder.

Laser Source

Fiber laser source – Max / Raycus / BWT (configurable)

The RUVEN WX15 uses a 1500W fiber laser source from Max, Raycus or BWT – configured to your preference and confirmed in your quotation.

Fiber laser source – Max / Raycus / BWT (configurable)
Fiber laser sourceMax / Raycus / BWT (configurable)MFSC-1500 / RFL-C1500 / BFL-CW1500
Wavelength1070–1090nmTo be confirmed
Modulation frequency1–5000Hz
Power stability±2%
Fiber core diameter50μm
Beam quality (BPP)1.5
Power consumption – laser source5kW

Data per the product configuration sheet.

Welding Head & Wire Feeder

Handheld welding head with control system and wire feeder

The handheld welding head, the laser control system and the wire feeder are supplied as one matched set as standard. Specific component brands are confirmed in your quotation.

Handheld welding head with control system and wire feeder
Welding systemHandheld welding head + control system + wire feeder (one set, standard)

Standard accessories

Supplied with the WX15 as standard (per the configuration list).

  • 6 copper nozzles (3 pairs)
  • 5 protective lenses
  • 1 pair of laser safety goggles
  • 1 data cable
  • 3m gas hose
  • 1kg welding wire: 304 stainless steel, Ø1.0mm
  • Wire-feeder parts (torch holder fittings and small tools)
  • QBH protective cap
  • Machine key

Welding aluminium requires a graphite wire-feed tube and a U-type 1.2 wire-feed wheel – please mention this when ordering. The final scope of supply is confirmed in your quotation.

05

Welding Applications

Typical joint types for handheld laser welding in hardware, sheet metal, furniture, kitchen and bathroom ware and auto parts. Suitability for your parts can be discussed with photos or drawings.

Butt and flat joints

Sheet-metal panels and aluminium plates.

Inside and outside corners

Cabinets, enclosures and boxes.

Frames and profiles

Door and window frames, furniture and brackets.

Continuous sealed seams

Containers, kitchen and bathroom ware.

Common materials

Metals commonly joined with the WX15. In some cases, dissimilar metals can also be joined – suitability is confirmed by sample testing.

  • Stainless steel
  • Carbon steel
  • Galvanized steel
  • Aluminium
  • Copper – sample testing recommended

Suitability confirmed per application

06

Welding Samples

Typical results of handheld laser welding with filler wire on sample parts.

  • Outside corner weld – stainless steel
    Outside corner weld – stainless steel
  • Frame corner joint – stainless steel
    Frame corner joint – stainless steel
  • Edge weld – stainless sheet
    Edge weld – stainless sheet
  • Tab-and-slot fillet welds – stainless sheet
    Tab-and-slot fillet welds – stainless sheet
  • Sealed seam – stainless vessel
    Sealed seam – stainless vessel
  • Sheet-metal chassis – stainless steel
    Sheet-metal chassis – stainless steel
  • Sheet-metal parts – carbon steel
    Sheet-metal parts – carbon steel
  • Welded boxes – stainless steel
    Welded boxes – stainless steel

Illustrative weld examples on sample parts – not customer projects. Results depend on material, joint design and parameters.

07

Videos & Operation

Welding demonstration – generic handheld laser welding clips on sample parts, not filmed with the WX15.

  • Welding demonstration: tube-to-plate fillet weld
  • Welding demonstration: plate on square tube
  • Welding demonstration: bracket on square tube
  • Welding demonstration: square tube corner joint

Generic welding demonstration clips on sample parts – not specific to one model and not customer projects.

Operation & control system

The user manual can be requested via WhatsApp or the quote form.

08

FAQ

Why is the WX15 water-cooled?

A separate Hanli SCH-1500 water chiller keeps the laser source and the handheld welding head at a stable temperature, which protects these key components. Water cooling is the usual choice for this power class.

Which laser source is installed?

The WX15 can be configured with a 1500W fiber laser source from Max (MFSC-1500), Raycus (RFL-C1500) or BWT (BFL-CW1500). Tell us your preference in the inquiry – the configuration is confirmed in your quotation.

What thickness can the WX15 weld?

At 1500W, the reference penetration on stainless, carbon and galvanized steel is about 1.5–2mm, and about 1mm on aluminium. Actual results depend on material, joint and parameters – see the process reference above and verify by sample testing.

Can it weld aluminium and copper?

Aluminium is usually welded with 1500W or more, so the WX15 is a suitable starting point. Aluminium wire requires a graphite wire-feed tube and a U-type 1.2 wire-feed wheel – please mention this when ordering. For copper, we recommend sample testing first.

Which shielding gas is used?

Argon (Ar), nitrogen (N2) or carbon dioxide (CO2) can be used to protect the weld pool. The reference settings above use argon.

What power supply does it need?

The WX15 is specified for 220V with a total power consumption of 7kW (laser source 5kW, chiller 1.7kW). The electrical connection is confirmed in your quotation.

09

Request a quote for the RUVEN WX15

Share your material, thickness and parts – we will prepare a recommendation and quotation.

Please note Email delivery for this form is not yet connected. Your inquiry is stored securely on our website and reviewed by our team.

Include country code, e.g. +33 …

Required field

  • RUVEN WX10 1000W water-cooled handheld laser welding machine with wire feeder
    Available

    Water-cooled

    RUVEN WX10

    1000W Water-Cooled Handheld Laser Welding Machine

    • 1000W
    • Water-cooled
    • 10m fiber cable
    View WX10 details
  • RUVEN WX20 2000W water-cooled handheld laser welding machine with wire feeder
    Available

    Water-cooled

    RUVEN WX20

    2000W Water-Cooled Handheld Laser Welding Machine

    • 2000W
    • Water-cooled
    • 10m fiber cable
    View WX20 details
  • RUVEN TX60 1500W air-cooled handheld laser welding machine
    Flagship

    Air-cooled

    RUVEN TX60

    1500W Air-Cooled Handheld Laser Welding Machine

    • Powered by Kepelin Laser Source
    • Equipped with 31F Welding Gun
    • 1500W
    • Air-Cooled
    • 8m fiber cable
    Explore TX60
  • RUVEN TX30 700W air-cooled handheld laser welding machine
    Standard

    Air-cooled

    RUVEN TX30

    700W Air-Cooled Handheld Laser Welding Machine

    • Powered by Kepelin Laser Source
    • Equipped with 31F Welding Gun
    • 700W
    • Air-cooled
    • 8m fiber cable
    View TX30 details

Planned product lines

Coming Soon · Planned

Laser Cutting Machines

Fiber laser cutting for sheet metal and tube processing.

Planned product line – not yet available

Register interest
Coming Soon · Planned

Laser Marking Machines

Permanent marking of logos, serial numbers and codes on metal and other materials.

Planned product line – not yet available

Register interest
Chat with us