
Technology
Handheld laser welding, explained
A clear overview of how air-cooled handheld fiber laser welding works – without unverified performance claims.
01
How handheld laser welding works
-
A
Laser source
A fiber laser generates a high-power beam that is guided through a flexible optical fiber cable to the welding gun.
-
B
Welding head
Optics in the handheld gun focus the beam to a small spot. Many heads oscillate (“wobble”) the beam to widen the seam and bridge small gaps.
-
C
Shielding gas
Argon or nitrogen protects the molten pool from oxidation and helps produce a clean, bright seam.
-
D
Control system
Power, wobble width, frequency and wire feed are set on the controller and stored as parameter sets for different materials.
RUVEN TX60
Air-cooled design
Air-cooled handheld laser welders remove heat with fans and heat exchangers instead of a separate water chiller. This typically means fewer components to install, no coolant to manage and easier repositioning in the workshop. Operating limits such as ambient temperature and duty cycle are defined by the manufacturer and will be stated in the TX60 documentation.
All confirmed specifications- No separate water chiller
- No coolant to manage
- Compact footprint
03
Laser welding compared with conventional processes
General, typical characteristics. Actual results depend on material, joint design, operator and parameters.
| Characteristic | Handheld laser welding | TIG welding | MIG/MAG welding |
|---|---|---|---|
| Heat input / distortion | Low | Medium | Medium to high |
| Welding speed on thin sheet | High | Low | Medium |
| Post-weld finishing | Usually minimal | Moderate | Often required |
| Learning curve | Short | Long | Medium |
| Joint fit-up requirements | Tight (wobble head helps) | Moderate | Tolerant |
04
Key process parameters
Laser power
Influences penetration and welding speed.
Wobble width & frequency
Control seam width and gap bridging.
Welding speed
Balances penetration and heat input.
Gas type & flow
Affect seam colour, oxidation and porosity.
Wire feeding
Adds filler material for gaps and fillet welds.
Laser safety first
Handheld laser welders are high-power laser products. Safe operation requires trained operators, laser-safety eyewear rated for the wavelength, protective clothing, a controlled work area and fume extraction. Safety information is part of the product documentation; always follow local regulations and standards.
- Laser-safety eyewear rated for the wavelength
- Controlled, marked work area
- Operator instruction
- Fume extraction
Let’s Find the Right Laser Solution for Your Business.
Tell us about your materials, parts and production goals. We will recommend a suitable configuration and prepare a quotation.